Table of Contents
Advertisement
Changing the rear wiper blade
A good rear wiper blade is essential for clear rear vision.
Damaged wiper blades should be replaced immediately.
Safety First
Fig. 165 Remove rear
window wiper blade
Fig. 166 Mount rear
window wiper blade
Operating instructions
Removing the wiper blade
– Lift the wiper arm away from the glass
– Slide the blade adapter in the direction of the arrow and remove
⇒ page 225, fig.
the blade
Fitting the wiper blade
– With one hand, hold the top end of the wiper arm.
– Place the blade as shown in the
the adapter along until it fits into place.
Check the condition of the wiper blade regularly. Change as required.
If the windscreen wiper scrapes, it should be replaced if damaged, or cleaned
if soiled.
If this is not sufficient, refer to a qualified workshop.
WARNING
Do not drive unless you have good visibility through all windows!
•
Clean the windscreen wiper blades and all windows regularly.
•
The wiper blades should be changed once or twice a year.
Caution
•
A damaged or dirty window wiper could scratch the rear window.
•
Never use fuel, nail varnish remover, paint thinner or similar products to
clean the window.
•
Never move the windscreen wiper by hand. This could cause damage.
Practical tips
Checking and refilling levels
⇒ page 225, fig.
165.
165.
⇒ page 225, fig. 166
and slide
Technical Data
225
Advertisement
Table of Contents
