Table of Contents
Advertisement
Towing rings
Fitting the towing eye
– Take the towing ring from the onboard tool set.
Safety First
Fig. 200 The front right
section of the vehicle:
Fitting the front towing
eye
Fig. 201 Fitting the
towing eye to the rear of
the vehicle
Operating instructions
– Pull the lower front cover down and leave the cover hanging on
the vehicle.
– Remove the cover of the screw hole, insert a screwdriver into the
lower slot and lever gently.
– Screw the towing eye as shown by the arrow anti-clockwise to the
⇒ fig. 200
limit position in the front
hole.
Practical tips
If and when
⇒ fig. 201
or rear
threaded
Technical Data
267
Advertisement
Table of Contents
