Magnetic Stripe Card Reader; Inserting The Smartcard - Panasonic CF-20 Series Operating Instructions And Reference Manual

Magnetic Stripe Card Reader

<Only for model with Magnetic Stripe Card Reader>
You need software to use a Magnetic Stripe Card Reader.
Do not:
n
Hit, bend, or drop the card.
Touch the contact part with fingers or metal object.
Place the card in very hot location for a long time.
Remove the card immediately after inserting it.
Inserting the Smart Card
To insert the card
Insert the magnetic tape part of the card into this unit's card reading part and slide it.
Face the magnetic tape of the card to the computer side.
N O T E
Do not use the strap (A) circled in red to prevent the card from being caught.
n
Slide the card parallel to the rail.
n
Slide the card at a constant speed.
n
Inserting the card at an angle to slide or removing the card at an angle after insertion may lead to incorrect reading.
n
C A U T I O N