Panasonic CF-20 Series Operating Instructions And Reference Manual page 83

Fingerprint Security
Can be changed only when [Set Supervisor Password] is set.
Sub menu items:
Sub-Menu Protection
Power-on Security
AMT Configuration
Only for model that supports Intel(R) AMT.
Can be changed only when [Set Supervisor Password] is set.
Secure Boot
The submenu appears when this item is selected.
If you change factory default setting, preinstalled-OS may not operate correctly.
Exit Menu
Save Values and Reboot
Reboot Without Saving Changes
Save Options
Save Current Values
Load Previous Values
Load Default Values
Boot Override
Windows Boot Manager
Recovery Partition
Windows Recovery Environment
UEFI: PXE IP4 Intel(R) Ethernet Connection (4) I219-LM
[Tablet]
UEFI: PXE IP6 Intel(R) Ethernet Connection (4) I219-LM
[Tablet]
UEFI: PXE IP4 Realtek USB Ethernet Controller [Key-
board Base]
UEFI: PXE IP6 Realtek USB Ethernet Controller [Key-
board Base]
Depending on the hardware constructions, some device name are different.
Diagnostic Utility
To reboot the system after saving the changes.
To reboot the system without saving the changes.
To save the changes for all Setup options.
To load previous values for all Setup options.
To return the settings to the default values.
Boot from Windows
Execute Recovery tools.
Boot from WinRE
Boot from LAN device (IP4)
Boot from LAN device (IP6)
Boot from LAN device (IP4)
Boot from LAN device (IP6)
Execute Diagnostic Utility.
Enter the sub-menu.
Enter the sub-menu.
Enter the sub-menu.