Security Menu - Panasonic CF-20 Series Operating Instructions And Reference Manual

You can select the boot device during start-up of the computer, too. Press ≪ Esc≫ key or
played. "Boot Menu" appears and you can select the device. To use this function, set [Boot Popup Menu] to [Enabled].

Security Menu

Boot Prompt Configuration
Boot Popup Menu
Password On Boot
The shutdown when the fast startup is enabled, this function is ineffective.
Password On Reboot
Password On Resume
Can be changed only when [Password On Boot] is set to [Enabled].
This function is effective when the computer is restarted after a shutdown (when
fast startup is enabled) and when the computer resumes from hibernation, but
not when it resumes from sleep.
Set Supervisor Password
Hard Disk Lock
Can be changed only when [Set Supervisor Password] is set.
User Password Protection
Set User Password
Can be changed only when [Set Supervisor Password] is set.
SW KB Support for Encryption
SW KB Support for BitLocker
Embedded Security (TPM)
Only for model that supports TPM.
Can be changed only when [Set Supervisor Password] is set.
Sub menu items:
Sub-Menu Protection
TPM State (Depending on the models, this item is not displayed.)
Pending TPM operation
When [Clear TPM Owner] is selected, clear owner information in the
TPM chip.
Use for discarding and transferring this product.
If you select [Clear TPM Owner] when the BitLocker is effective, you
may need to reinstall OS.
Current TPM Status Information (Depending on the models, this item is
not displayed.)
soon after "Panasonic" boot screen is dis-
Underlined items are the factory presets.
Disabled
Enabled
Disabled
Enabled
Disabled
Same as Boot
Disabled
Enabled
Enter the sub-menu.
Disabled
Enabled
No Protection
Protected
Enter the sub-menu.
Disabled
Enabled
Disabled
Enabled
Enter the sub-menu.