Using The Hand Strap - Panasonic CF-20 Series Operating Instructions And Reference Manual

5. Pass the belt (C) which has an adjuster through the strap holes located on the upper side of the back of the tablet.
6. Pass the belt through the adjuster and securely tighten it so it does not loosen.

Using the hand strap

1. When using the computer holding with hand, insert your hand to the hand strap.
2. Fix the hand strap firmly so that the computer does not come off, and then turn it over.
3. Adjust the angle of the hand strap if it is necessary.
If the hand is not securely fixed to the hand strap, the computer may drop.
n
When the hand strap is too loose or too tight, you can adjust the hand strap according to the instructions below.
C A U T I O N