Checking The Remaining Battery Power - Panasonic CF-20 Series Operating Instructions And Reference Manual

<Tablet>
Battery indicator
Green
Blinking red slowly (1
second interval)
Blinking red (0.5
second interval)
Not lit
N O T E
Once the battery is fully charged, the computer performs recharging only when the battery level becomes less than approximately 95%, so over-
n
charging is avoided.
When [LED] is set to [OFF] on the [Concealed Mode Configuration] menu, LED does not turn on.
n
Charging
When connecting the computer to a power outlet, the battery charging starts automatically.
The battery pack is not charged when you first purchase it. Be sure to charge it before using for the first time.
The battery pack of the keyboard base is not charged even if the AC adaptor is connected to the tablet. If the AC adaptor is connected to the keyboard
base, both the tablet battery and keyboard base battery can be charged.
If the both the keyboard base and the tablet attached the battery, the discharging starts the battery of keyboard base firstly.

Checking the Remaining Battery Power

To check the remaining battery power on the screen
1. Click
or
The remaining battery power is displayed.
Alternatively, you can check the remaining battery power by ≪ Fn≫ + ≪ F9≫ key combination. (After signing in to Windows)
The battery pack can be replaced. (When the battery latch (D) and battery latch (E) is slid
with the AC adaptor disconnected, either battery pack remains the battery power.)
<Only for model with built-in bridge battery>
The battery pack can be replaced. (When the battery latch (D) and battery latch (E) is not slid
with the AC adaptor disconnected, the built-in bridge battery discharges.)
The battery packs cannot be replaced.
The bridge battery has deteriorated.
The battery pack is not inserted or not being charged or other than those above.
Concealed mode is set to ON.
on the task tray.
Battery status