Quantum DXi9000 Quick Start

DXi9000 QUICK START
Using variable-length deduplication, the DXi9000 provides scalable backup storage and disaster recovery
protection across sites. It can also replicate the data as part of disaster recovery. Two systems are available: the
DXi9000 SD (standard density) and DXi9000 HD (high density). For installation instructions, including pre-
installation requirements, log into CSWeb, and access the DXi9000 Service Documentation Center:
https://qsweb.quantum.com/DXi9000_Service.
Activate your warranty and register your product with Quantum:
Node
The Node for the HD and the SD systems has the same options.
Left control panel
Node Front
Array and Expansion Module (EBOD) Fronts
The DXi9000 SD system has one Array Module, and up to nine EBODs. The DXi9000 HD can have up to two EBODs.
System ID button
Power and Enclosure Status lights
SD Array and Expansion Module Front
Array and Expansion Module Backs
The Array Module and the EBOD for the DXi9000 SD and the DXi9000 HD systems are the
same.
Ethernet
activity
Ethernet
link rate
Attention
Cache
Activity
expansion activity
active
Locate
Tray ID and
error code
Array Module Back
Solid state drives Right control panel
Information
Hard drives
Drive expansion
SAS host/
port fault
expansion fault
SAS host/
Drive expansion
activity
www.quantum.com/startup
USB connectors
VGA connector
tag
SAS ports
Tray ID and error code
Power, Service, and Locate LEDs
Page 1
Optional Ethernet or
Fibre Channel ports
Power supplies
Ethernet ports
HD Array and Expansion Module Front
Drive expansion
port fault
Drive expansion
activity
Expansion Module Back
Node Back
Attention
Locate