Toshiba V Series Operation Manual page 9

Preface
This manual describes the interface module EN7** (called EN7 module in the manual)
and the DS connection module FN711 which connect controllers of the Integrated
Controller V Series to the surveillance and control network Ethernet for that series,
presenting an overview, installation and operating procedures, and instructions for
maintenance and inspection.
The EN7 comes in the following four types, which vary depending on the interface.
• EN711: Module for 10BASE5 single bus
• EN721: Module for 10BASE5 dual bus
• EN731: Module for 10BASE2 single bus
• EN741: Module for 10BASE2 dual bus
• EN751: Module for 100BASE-TX/10BASE-T single bus
• EN751A: Module for 100BASE-TX/10BASE-T single bus
• EN761: Module for 100BASE-TX/10BASE-T dual bus
• FN711: Module for 100BASE-TX/10BASE-T dual DS connection
Be sure to read first the Safety Precautions for you to use the equipment in the correct
way.
Related Document
• Monitoring and Control Network Ethernet Installation and Wiring Manual (6F8C0880)
• model 3000/2000 DS Connection Module FN Function Manual (6F8C0938)
vii
6F8C0878