pottery barn kids FILLMORE Quick Start Manual

Dresser

Hide thumbs Also See for FILLMORE:

pottery barn kids

FILLMORE DRESSER

PRE-ASSEMBLY:

Please read all instructions before beginning assembly.

For your safety and ease, assembly by two adults is recommended.

Remove all parts and hardware from box and lay out on a carpeted or scratch-

free work surface, as this will avoid damaging any parts during assembly. The

shipping box provides an ideal work surface.

Do not dispose of any contents until assembly is completed to avoid accidentally

discarding small parts or hardware.

Use the parts and hardware lists to identify and separate each of the pieces

included.

Note: Do not fully tighten all bolts until all parts are in place. Failure to follow

these instructions may cause the bolts to misalign during assembly.

The use of power tools for assembly is not recommended. Power tools can

damage hardware or split wood.

1/2

Table of Contents

Do you have a question about the FILLMORE and is the answer not in the manual?

Page 1 FILLMORE DRESSER PRE-ASSEMBLY: Please read all instructions before beginning assembly. For your safety and ease, assembly by two adults is recommended. Remove all parts and hardware from box and lay out on a carpeted or scratch- free work surface, as this will avoid damaging any parts during assembly. The shipping box provides an ideal work surface.
Page 2 ASSEMBLY INSTRUCTION: 1. Slowly turn the dresser upright. If the dresser doesn’t sit level, please adjust the levelers under legs. Assembly is completed. CARE INSTRUCTION: Dust often using a clean, soft, dry lint-free cloth. Blot spills immediately, and wipe with a clean, damp, cloth. We do not recommend the use of chemical cleansers, abrasives or furniture polish.