Installing The Macintosh Driver - Adaptec DuoConnect Adapter AUA-3121 User Manual

Adaptec aua-3121 duoconnect adapter user's guide

Hide thumbs Also See for DuoConnect Adapter AUA-3121:

Table of Contents

Installing the Macintosh

Driver

In this procedure, you install the DisableSleep driver, which

prepares your Macintosh computer to use the DuoConnect card.

Note: Blue and white G3s are not supported.

1 Turn on or restart the computer and insert the DuoConnect CD.

2 Double-click the Start Installation Here file on the CD.

3 Follow the instructions to install the latest Macintosh USB

drivers, if necessary.

4 Double-click the DuoConnect Installer file and follow the

instructions.

5 After the installation is complete, click Restart, if necessary, to

make the new settings take effect.

6 Verify that the card is seen by your computer by clicking Apple

System Profiler in the Apple Menu. Then, click the Devices

and Volumes tab.

Note: The Apple System Profiler (version 2.5.8 or earlier)

identifies the DuoConnect adapter incorrectly. If you have

one of these earlier versions, download a new version from

Apple's software update page.

Installing the Macintosh Driver

Table of Contents

Do you have a question about the DuoConnect Adapter AUA-3121 and is the answer not in the manual?

1923200