Setting The Auto Attendant Day And Night Times - TMC EPIC EV4500 User Manual

4-line intercom speakerphone with auto attendant, caller id & voice mail
Table of Contents

Advertisement

Setting Up and Operating a Telephone as an Auto Attendant

Setting the Auto Attendant Day and Night Times

To set the Auto Attendant Day
and Night Times:
1
Press P.
- The display will read "Program..."
2
Press the soft key under ANSW.
3
Press the soft key under NEXT
repeatedly, until "Night Timer
Set" appears in the display, then
press the soft key under ENTER.
4
Press the soft key under CHANGE if
you wish to change the Start of the
Auto Attendant night timer, then
enter the desired start time as
instructed in the display.
5
Press the soft key under NEXT.
6
Press the soft key under CHANGE if
you wish to change the End of the
Auto Attendant night timer, then
enter the desired start time as
instructed in the display.
7
Press P to exit.
78
Answering System
Your telephone is factory-set to start its night
timer at 5:00PM and end its night timer at
9:00AM. This means that the Auto Attendant will
play the AA Night OGM between 5:00PM and
9:00AM. The rest of the time it will play the AA
Day OGM.
If you would like, you may set the Night Timer to
whatever times you choose.
Note: If you do not want the AA Night OGM to
play at any time on one or more of your lines,
you may turn it off on a per line basis (See
Setting Night Message On/Off by Line, page 87).
If you wish you may change the
Night Timer from its factory setting.
Night Timer Set
BACK ENTER NEXT

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents