Table of Contents
Advertisement
8.13
Malfunction messages for testing OBD printed circuit board with KTS115PC program
i Multiple errors may be reported simultaneously, e.g. = $0001 + $ 0002 + $ 0004
8.13.1 Error messages for "SDTEST"
No.
Possible cause
$0001
OBD/CAN-LP defective
$0002
$0004
OBD/CAN connection cable
or OBD/CAN-LP defective.
$0008
No power supply.
or OBD/CAN-LP defective.
$0016
$0032
$0064
OBD/CAN connection cable
$0128
or OBD/CAN-LP defective.
$0256
$0512
8.13.2 Error messages for "DLCTEST"
No.
Possible cause
$0001
OBD/CAN-LP defective
$0002
$0003
B+ not connected, or
$0016
OBD/CAN-LP defective
$0004-
§0015
OBD/CAN-LP defective
Remedy
OBD/CAN-LP replace
Repeat test using short circuit plug KS 350.
If malfunction no longer present, OBD/CAN-
connecting cable should be replaced.
If malfunction continues then OBD/CAN-LP
to be replaced.
Banana plugs B+ (red) and GND (black) of OBD/CAN-
Connect adapter line connecting cable AL 350 to voltage
supply.
Repeat test using AL 350.
If error message still
present, repeat test using short circuit plug KS 35.
If malfunction no longer present, OBD/CAN-
connecting cable should be replaced.
If malfunction still present, OBD/CAN-LP
to be replaced.
Repeat test using short circuit plug KS 350.
If malfunction no longer present, OBD/CAN-
connecting cable should be replaced.
If malfunction still present, OBD/CAN-LP
Remedy
OBD/CAN-LP to be replaced.
Banana plugs B+ (red) and GND (black) of
the adapter cable
Connect AL 350 to power supply.
Repeat test.
If malfunction still present, repeat test
using short circuit plug KS 350.
If malfunction no longer present, OBD/CAN-
connecting cable should be replaced.
If malfunction still present, OBD/CAN-LP to be replaced.
OBD/CAN-LP to be replaced.
Chapter
10.30
10.30
10.30
Chapter
10.30
10.30
10.30
63
Advertisement
Table of Contents
