Checking Oil Temperature And Engine Speed In Petrol Diagnosis; Terminal Diagram Of Inductive Clip-On Trigger Sensor - Bosch BEA 150 Repair Instructions

6.2 Checking oil temperature and
engine speed in Petrol Diagnosis
6.2.1 Terminal diagram of
inductive clip-on trigger
sensor
6.3 Checking V-lambda
48
12. After the HC residue test, the RPM
and oil temperature are displayed.
13. Set the temperature selector switch
of the P 140 first to 80°C, then to
120°C.
Nominal values: 80°C + 3°C
120°C + 3°C
14. Set the speed selector switch of the
P 140 to the engine speeds from
600 - 6000 rpm one after the other:
Nominal values: 600 rpm + 10 rpm
1500 rpm + 10 rpm
4000 rpm + 10 rpm
6000 rpm + 10 rpm
i To perform the V-lambda voltage test
you will require connection cable
1 684 465 463.
Press F2 or u to go to the V-lambda
1.
menu and open it by pressing F5 >>
or E.
2. In the No. of pulses menu, set the
number of pulses to 1 using the o or u
keys.
Solder side
Lötseite
Shield
Schirm
bk sw
1
2
gr
3
224842Ha
2
1 3