Intended Usage; Conveyor Systems With Open Transfer Systems; Usage In Explosion-Protected Areas; Restrictions On The Use Of The Product - Martin SQC2 Installation Instructions Manual

Secondary cleaner
Table of Contents

Advertisement

2.2
2.2.1
2.2.2
2.2.3
© Martin Engineering GmbH

Intended usage

The secondary cleaner can be used exclusively for the cleaning of a
conveyor belt in the bottom belt conveyor of a conveyor system. For
this purpose, the cleaner must be installed directly behind a head
pulley or counter-pressure roller.
It can be used on conveyor belts with a maximum belt width of
2400 mm and a maximum conveyor speed of 5 m/s.
Every other usage of this product is deemed as misuse. Please
contact Martin Engineering customer service if you would like to use
this product for a different purpose. We will be happy to assist you
with the product configuration.

Conveyor systems with open transfer systems

These installation instructions describe the installation on conveyor
systems with encapsulated transfer systems. Various MARTIN
installation brackets can be used on open transfer systems.
Martin Engineering or one of its representatives can assist with the
position or with special solutions in cases where the installation
conditions are complicated such as insurmountable static
components or a head pulley as the tensioning station.

Usage in explosion-protected areas

This product can also be used in potentially explosive areas under
certain conditions. Contact Martin Engineering for more information
on usage in potentially explosive areas.
The cleaner must not be used in a higher equipment protection
category or under other operating conditions than those specified by
Martin Engineering unless such usage has been approved by
Martin Engineering.

Restrictions on the use of the product

The product specified here may only be used within the scope of the
specifications referred to above. Usage in a higher equipment
protection category or under other operating conditions than those
specified by Martin Engineering shall be deemed misuse and is only
permitted if approved by Martin Engineering.
Martin Engineering or one of its representatives can assist you with
the product configuration if you need to use this product for a
different purpose.
6
®
M3682UK-09/17

Advertisement

Table of Contents
loading

Table of Contents