Replacing A Single Blade - Martin SQC2 Installation Instructions Manual

6.3.2
© Martin Engineering GmbH

Replacing a single blade

1. Remove the cleaner mainframe.
2. Loosen and remove the lower screw fittings for the specific
blade (1, Fig. 32).
Fig. 32:
3. Repeat step 2 for every additional blade to be replaced.
4. Remove the blade from the cleaner mainframe.
5. Attach a new blade to the cleaner mainframe.
6. Screw the blade to the cleaner mainframe.
7. Then install the cleaner again.
1
41 M3682UK-09/17