Table of Contents
Advertisement
2.2
2.2.1
2.2.2
2.2.3
© Martin Engineering GmbH
Intended usage
The secondary cleaner can only be used for the cleaning of
conveyor belts that are used for the transportation of bulk material.
It can be used on conveyor belts with a maximum belt width of
2000 mm and a maximum conveyor speed of 10 m/s.
Every other usage of this product is deemed as misuse. Please
contact Martin Engineering customer service if you would like to use
this product for a different purpose. We will be happy to assist you
with the product configuration.
Conveyor systems with open transfer systems
These installation instructions describe the installation on conveyor
systems with encapsulated transfer systems. Various MARTIN
installation brackets can be used on open transfer systems.
Martin Engineering or one of its representatives can assist with the
positioning or with special solutions in cases where the installation
conditions are complicated such as insurmountable static
components or a head pulley as the tensioning station.
Usage in explosion-protected areas
This product may not be used in explosion-endangered areas.
Restrictions on the use of the product
The product specified here may only be used within the scope of the
specifications referred to above. Usage in a higher equipment
protection category or under other operating conditions than those
specified by Martin Engineering shall be deemed misuse and is only
permitted if approved by Martin Engineering.
Martin Engineering or one of its representatives can assist you with
the product configuration if you need to use this product for
a different purpose.
6
®
M3289UK-01/17
Advertisement
Table of Contents
