Replacing The Fuses; Vehicle Lights - Yamaha MTM155 Owner's Manual

Replacing the fuses

2
4
3
1. Main fuse
2. Sub fuse
3. Terminal fuse 1
4. Spare fuse
The fuse box is located under the rider
seat.
If a fuse is blown, replace it as follows.
1. Turn the main switch off and turn
off the electrical circuit in ques-
tion.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
EAU53044 avoid causing extensive dam-
age to the electrical system and
possibly a fire.
1
Specified fuses:
Main fuse:
15.0 A
Sub fuse:
7.5 A
Terminal fuse 1:
2.0 A
4
3. Turn the main switch on and turn
on the electrical circuit in question
to check if the device operates.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
Periodic maintenance and adjustment
[EWA15132]
7-31

Vehicle lights

This model is equipped with LED lights
for headlights, auxiliary lights and
brake/tail light. If a light does not come
on, check the fuse and then have a
Yamaha dealer check the vehicle.
1. Auxiliary light
2. Headlight
NOTICE
Do not affix any type of tinted film or
stickers to the headlight lens.
EAUN2261
1
2
7
ECA16581