Handlebar Switches - Yamaha MTM155 Owner's Manual

Instrument and control functions
5. Push the "SELECT" button until
the multi-function display exits the
backlight setting mode.
4

Handlebar switches

Left
1
2
1. Pass switch "PASS"
2. Dimmer switch " / "
3. Horn switch " "
4. Turn signal switch " / "
Right
1
1. Start/Engine stop switch "
4-9
EAU1234M
Dimmer/Pass switch "
Set this switch to "
beam and to "
To flash the high beam, push the
switch down towards "PASS" while the
headlights are on low beam.
Turn signal switch "
To signal a right-hand turn, push this
switch to "
3 turn, push this switch to "
4
released, the switch returns to the cen-
ter position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
Horn switch "
Press this switch to sound the horn.
Start/Engine stop switch "
To crank the engine with the starter,
set this switch to "
the switch toward " ". See page 6-2
for starting instructions prior to starting
the engine.
/ / "
EAU54202
/ /PASS"
" for the high
" for the low beam.
EAU12461
/ "
". To signal a left-hand
". When
EAU12501
"
EAU68270
/ / "
", and then slide