Yamaha MTM155 Owner's Manual page 35

With the engine turned off:
1. Set engine stop switch to run position.
2. Turn main switch to on position.
3. Shift transmission into neutral.
4. Push the start switch.
Does the engine start?
5. Stop the engine.
6. Set engine stop switch to run position.
7. Shift transmission into gear.
8. Pull the clutch lever.
9. Push the start switch.
Does the engine start?
The system is OK. The motorcycle can be ridden.
YES NO
YES
NO
Instrument and control functions
WARNING
If a malfunction is found, have the vehicle
inspected before riding.
The neutral switch may not be working.
The vehicle should not be ridden until
checked by a Yamaha dealer.
The clutch switch may not be working.
The vehicle should not be ridden until
checked by a Yamaha dealer.
4-16
4