ADEEPT RaspRover User Manual page 40

network={
ssid="WIFI"
psk="PASSWORD"
key_mgmt=WPA-PSK
priority=1
}
In the code above, replace WIFI with your own WiFi SSID name and PASSWORD with your
password for the WiFi network. Save the file and change the name of the file
wpa_supplicant.txt into wpa_supplicant.conf.
* Make sure MAC filtering has been turned off for the router.
* The WPA-PSK behind key_mgmt= is the common encryption method for most routers. If the
network connection fails, you may log in and check on the router management page.
* For more about the network connection for Raspberry Pi, please visit the related page via
this link:
https://www.raspberrypi.org/forums/viewtopic.php?t=203716
The two files newly created are as shown below:
Download and Install PuTTy
PuTTy is a software that connects with the Raspberry Pi via ssh. With the tool, you may
control the Raspberry Pi by the computer.
Download:
https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html
www.adeept.com
37