7.2. Cancelling a Programme
Follow the steps below to cancel a
programme while in operation.
When the door of your machine is
opened, the most recently selected
programme will show on the display.
Press and hold the Programme Selection
button for 3 seconds. The End Of
Programme Indicator will flash and '1' will
show on the Programme Display.
The water discharge process will start after the
door of the machine is closed and will continue
for 30 seconds. A buzzer will sound 5 times
when a programme is cancelled and the End Of
Programme Indicator will illuminate.
7.3. Switching the Machine Off
The End Of Programme Indicator will
illuminate when a programme is complete. A
signal will also sound 5 times. You can then
switch your machine off using the Power On/
Disconnect the plug and
turn off the water tap.
NOTE: Do not open the door before a
programme is complete.
NOTE: Leave the door slightly open at
the end of a wash programme to speed up
NOTE: If the door of the machine
is opened or the power is cut during
operation, the program will continue when
the door is closed or the power returns.
EN - 16