Test Strip; Water Hardness Table; Water Softener System; Setting - Sharp QW-DX41F47W User Manual

4.3. Test Strip

Run water Keep the
through the strip in
tap (1min.) water (1sec)
NOTE: The level is set to 3 as default. If the water is well water or has a hardness level
above 90 dF, we recommend that you use filter and refinement devices.

4.4. Water Hardness Table

Level German dH
1 0-5
2 6-11
3 12-17
4 18-22
5 23-31
6 32-50

4.5. Water Softener System

The dishwasher is equipped with a water softener which reduces the hardness in the
mains water supply. To find out the hardness level of your tap water, contact your water
company or use the test strip (if available).

4.6. Setting

• Push the programme button and hold it down.
• Turn on the machine.
• Hold down the programme button until the "SL" disappears.
• The machine will display the last setting.
• Set the level by pushing the programme button.
• Switch off the machine to save the setting.

4.7. Detergent usage

Only use detergents specifically designed for domestic dishwashers.
Add the recommended amount of detergent for the selected programme to ensure the best
performance.
Keep your detergents in cool, dry places out of reach of children.
See the detergent manufacturer's instructions for a further information.
Shake the Wait
strip. (1min.)
French British
dF dE
0-9 0-6
10-20 7-14
21-30 15-21
31-40 22-28
41-55 29-39
56-90 40-63
EN - 10
Set the hardness level of
your machine.
1
2
3
4
5
6
Indicator
L1 is shown on the display.
L2 is shown on the display.
L3 is shown on the display.
L4 is shown on the display.
L5 is shown on the display.
L6 is shown on the display.