Page 3
such as carpet. Put the leg frame B/C to the table top and matching the holes, secure the bolts and washers ( locking washer first) FINGER TIGHT ONLY into the legs through the holes on the end rail of the table top.
Page 4
over, taking care not to turn the table over on two legs as this may cause damage. Align the table top evenly on both side ends so the top is flush with the legs. Then using the Allen key provided, tighten fully all bolts that were only finger tight from step 2. back together and secure in place using the two metal clips underneath the side of extension leaf and two metal clips underneath the side of table top.Do the reverse to close the table.
Need help?
Do you have a question about the Bosco 1398 and is the answer not in the manual?
Questions and answers