Displaying The Operational Status Of Power Modules; Displaying The Temperature Information Of The Firewall - H3C SecPath F5030 Installation Manual

Field
Swap
Displaying the operational status of power
modules
Use the display power command to display the operational status of power modules.
<Sysname> display power
Slot 1 Power
Slot 1 Power
Table 13 Output description
Field
Power
Status
Displaying the temperature information of the
firewall
Use the display environment command to display the temperature information of the firewall.
<Sysname> display environment
System Temperature information (degree centigrade):
--------------------------------------------------------------------------------
---------
Slot
hutdown-UpperLimit
1 inflow
NA
1 inflow
NA
1 outflow 1
NA
1 hotspot 1
NA
Table 14 Output description
Field
Slot
0 Status: Normal
1 Status: Absent
Sensor Temperature LowerLimit Warning-UpperLimit
1 36
2 34
42
62
Description
Slot number of the interface module.
Description
Swap memory.
Description
Number of the power module.
Power module state:
•
Normal—The power module is operating correctly.
•
Absent—The power module is not in position.
•
Abnormal—The power module has failed.
0
0
0
0
33
Alarm-UpperLimit S
60 70
60 70
60 70
80 92