Battery Operation - CareFusion PrinterNOx Operating Manual

Following this, the required NO concentration in the range 1 to 100
should be entered:
When all the data is entered the required NO flow and the maximum
FiO is calculated and displayed on the following screen:
2

Battery operation

During patient transportation or mains power failure, the PrinterNOx
may be powered from the internal rechargeable batteries for
approximately 2 hours.
Enter required NO
gas concentration
to patient:
Bias flow
Bottle conc
Patient conc
Req NO flow
Maximum FiO2 96.9 %
Press key to continue
27
ppm
70 L/m
650 ppm
20 ppm
2.22 L/m