CareFusion PrinterNOx Operating Manual page 25

3. Set Alarms
Selecting option three will allow the NO and NO
set individually from the following menu:
The current alarm levels are displayed for reference and, for
example, the upper alarm level for NO may be altered by selecting
option 1 when the following screen will be displayed:
Type in the required alarm level and press ENTER.
The lower NO and NO
with option 2 and 3 respectively.
The valid range of entry is 0 to 99 for the NO upper and lower
alarms and the upper alarm must be set higher than the lower
alarm.
Set Alarms
1 Upper NO
2 Lower NO
3 Upper NO2 :
4 Exit
Enter new alarm
level :
Upper NO
alarm levels are set with the same procedure
2
23
alarm levels to be
2
: 20
: 5
4
: