Setup - CareFusion PrinterNOx Operating Manual

6. Setup

Selecting this menu item allows various options to be set and
displays the screen:
The first option clears the stored 24 hours data from the memory.
This is done when the currently stored data is of no interest or has
previously been accessed so that future access of required data will
be quicker.
The second option is used to change the date and time stored in the
real time clock.
"Toggle output" is used to select whether data is sent to the printer
or the RS232 port at the rear of the instrument. An asterisk appears
against the selected output device. The initial few lines of
calibration and alarm information is always printed regardless
whether the printer is selected.
The date format can be changed using option 4.
Option 5 returns the display to the main menu screen.
SET UP
1 Clear memory
2 Set date/time
3 Toggle output:
*printer
4 Toggle date format
*DD/MM
5 Exit
25
RS232
MM/DD