Tiger JOHN DEERE 5083E Assembly Instructions Manual page 112

MAINTENANCE
GREASING POINTS ON BOOM AND PIVOT
Locate grease zerks on deck pivot ssembly, on the
deck end of secondary boom, at main/secondary
boom joint, and at swivel end of main boom. Inject
Lithium-Complex Extreme Pressure grease
conforming to NLGI2-ISO 320 specifications until
grease begins to protrude from ends.
DECK STOP ADJUSTMENT
On boom flail, loosen locking nut. Turn adjustment
bolt in, and run deck cylinder out to full extension.
Adjust bolt out until the head just touches the boom,
and tighten lock nut. NOTE: Bolt should not hit
boom before cylinder reaches full travel.
GREASING SPINDLE
Locate grease fitting on inside of deck housing.
Inject Tiger Spindle Lubricant, part number
06540000 into spindle housing. Fill with lubricant
until lubricant weeps out of top spindle seal.
Lubricate spindle weekly or every 40 hours of use.
Boom Maintenance Section 4-14
©2011 Alamo Group Inc.