Tiger BENGAL BRUTE JD 62-6420 Mounting And Operating Instructions page 24

Arrange the hoses in the clamp that attaches to the boom mounting bracket as
shown above, with the 1" motor hoses closest to the bracket and the return hose
closest to the boom arm. Pull the hoses snug from the swivel to the mounting bracket
clamps, when main boom is still forward, and tighten the hoses in the clamp.
Make sure the 1" motor hoses do not kink as the boom arm is moved into the
stowing position. If this happens the motor hoses will have to be shortened, because
there is too much hose between clamps.
ASSEMBLY
Assembly Section 2-18