Tiger BENGAL BRUTE JD 62-6420 Mounting And Operating Instructions page 20

PRESSURE LINE INSTALLATION
The hydraulic pressure line will be plumbed into the side of the tractor rear
remotes. Locate the pressure port on the spacer and remove the plug (refer to the
illustration below and the Parts Section pages for position of the pressure port). After
the plug is removed then install 22mm adapter or elbow. Next connect a 1/2" hose
from the tractor remote valve to the Tiger valve.
The return line will be plumed next to the pressure line on the side of the tractor
rear remotes. Locate the return port and remove the plug (refer to the illustration
below and the Parts Section for the position of the return port). After the plug is
removed then install 22mm adapter or elbow. Next connect a 1/2" hose from the
tractor remote valve to the Tiger valve.
PRESSURE
RETURN
ASSEMBLY
RETURN LINE INSTALLATION
HUSCO VALVE
Assembly Section 2-14
LOAD
SENSE