Table of Contents
Advertisement
4.0 Connector and Indicator Functions
1)
Status LEDs
ACT – ON means HDMI Input receiving video (active)
LINK – ON means fiber optic link to receiver is on
2)
Fiber Transmitter Module
a.
Connects to fiber optic cable from receiver
3)
AUDIO EMBED Button and LEDs
L/R - Audio on RX HDMI OUT connector comes from TX L/R IN connector
a.
SPDIF - Audio on RX HDMI OUT connector comes from TX SPDIF IN connector
b.
c.
Pass - Audio on RX HDMI OUT connector comes from TX HDMI IN connector
4)
AUDIO EDID Button and LEDs
a.
2 CH - Alters EDID to include only 2CH audio settings
Multi- Alters EDID to include only Mult-Channel audio settings
b.
c.
Pass - Pass EDID to source from RX Sink
5)
VIDEO EDID Button
a.
Single button press - Toggles between EMULATED and PASSTHRU EDID modes
b.
1 Blink - HOLD FOR 3 SECS - LEARN EDID
c.
2 Blinks -HOLD FOR 7 SECS - FACTORY DEFAULT
VIDEO EDID LED
d.
OFF = PASS-THRU EDID
e.
ON = EMULATED EDID
f.
This LED blinks when VIDEO EDID button is pressed AND HELD to show function
selected when button is released.
HDMI Fiber Optic Extender
FXT-460-S Front
© Copyright 2020 Hall Research, LLC.
7
Advertisement
Table of Contents
