Hall Research Technologies FXT-460 User Manual page 9

1) Fiber Receiver Module
a. Connects to fiber optic cable from transmitter
2) Status LEDs
ACT – ON means HDMI Input receiving video
LINK – ON means fiber optic link to receiver active
3) RS-232 Terminal Strip
a. Connect to external RS-232 controller. Data flows in direction shown
4) Mini-USB Port
a. Used to update system firmware.
1) 12V DC
Connect to the included power supply.
a.
2) HDMI OUT
Connect to a compatible HDMI SINK
a.
3) EXTRACTED AUDIO – SPDIF Out
4) EXTRACTED AUDIO – L/R Out
a.
b.
FXT-460-R Front
FXT-460-R Rear
Connect to other compatible digital audio equipment.
Note: These audio outputs can be either the HDMI INPUT Audio or
Embedded Audio from Transmitter
HDMI Fiber Optic Extender
© Copyright 2020 Hall Research, LLC.
9