Learning To Scan (Using The Trainer) - WizCom Technologies Quicktionary 2 Premium Professional Manual

Learning to Scan (using the Trainer)

This tutorial uses the Notes application and the plastic
scanning Trainer provided with your Pen.
1. Slide the Trainer onto the tip of the Pen (instead of the
cap) and press into place.
Turn the Pen on. The Pen Main Menu appears. If the
2.
Pen Main Menu does not appear, press ESC until it
is visible on screen.
Scroll to the Notes application using the direction keys
3.
and press ENT.
Scroll down to New File and press ENT.
4.
Scroll down to OK and save the default file name. A
5.
blank screen appears with a blinking cursor.
6. Position the Pen at a 90° angle and center the
following text between the feet of the trainer. This angle
should be maintained even when scanning without the
trainer.
Use the following practice sentence:
This sentence will help me practice scanning.
7. Glide the Pen from right to left in a straight line over the
text. Start scanning 1cm from the end of the text and
finish 1cm after the beginning of the text.
8. The scanned text will appear on the screen. If the text
does not appear correctly on the screen, press ENT to
erase it and scan again.
Getting Started
7