The Scan To Pc Application - WizCom Technologies Quicktionary 2 Premium Professional Manual

The Scan to PC Application

Use Scan to PC to scan text and send it directly to the PC.
Text can be scanned into any file or application on the PC
that has a blinking cursor. Access the Scan to PC
application by selecting it from the Pen Main Menu.
Scan to PC works in the same way as standard editing
using a keyboard i.e., highlighted text is overwritten, text is
inserted in Insert Mode or overwritten in Overwrite Mode.
Using Scan to PC does not interfere with your regular use of
the Windows application.
To use Scan to PC, the WizCom Desktop must be running
on the PC. If there is no Scan to PC compatible application
open on screen, the text will still be sent from the Pen, but
will not be accessible on the PC. The WizCom Desktop
does not need to be maximized on screen as long as it is
running (the
Windows taskbar).
To use Scan to PC:
Launch the WizCom Desktop.
1.
2. Make sure that the Pen is connected to the PC with the
USB cable.
3. Ensure that communications are working between your
Pen and computer. If you are not sure if your
communications are working, run the
Communications Wizard from the Help menu on the
WizCom Desktop Menu Bar.
Note: If you have problems with Pen-PC
Communications, see Establishing Pen-PC
Communications on page 9.
On your Pen, select Scan to PC from the Pen Main
4.
Menu. The application opens in the scanning screen so
you can start scanning immediately.
icon appears in the notification area of the
The Pen
45