The Cd; Installing The Wizcom Desktop - WizCom Technologies Quicktionary 2 Premium Professional Manual

Getting Started

The CD

The CD should run automatically when you insert it into
the drive on your PC. If the setup does not begin
automatically:
1. Click the Windows Start button and select Run.
2. Type x:\setup.exe (where x is your CD-ROM drive),
then click OK.
Use the CD to:
Install Product on PC: Install the USB driver and
WizCom Desktop necessary for transferring data
between your Pen and PC.
Install Add-Ons: Install additional components on
your Pen, such as dictionaries, interface languages,
spellers (for enhanced scanning recognition for specific
languages) and the Image Capture application for
scanning small images. The USB driver must be
installed (from Install Product on PC) before you can
install any Add-Ons.

Installing the WizCom Desktop

While the Pen can be used as a stand-alone device,
installing the WizCom Desktop from the CD allows you to
transfer files between your Pen and PC. To install the
Desktop you will need your Pen, the CD and USB cable
provided with the Pen.
Important: Do not connect the USB cable to your computer
until you have completed the USB driver installation.
To install the Desktop:
1. Insert the CD into the drive on your computer. If the
setup does not begin automatically:
Click the Windows Start button and select Run.
Type x:\setup.exe (where x is your CD-ROM drive),
then click OK.
2. The CD browser window will appear.
3. From the Main Menu click Install Product on PC.
4. Follow the instructions on the CD to install first the USB
driver and then the WizCom Desktop.
Note: Please restart your computer if requested to during the
installation procedure.
8