Tutorial 1: Learning To Scan (With The Trainer) - WizCom Technologies ReadingPen TS User Manual

Tutorials
Tutorial 1: Learning to Scan (with
the Trainer)
This tutorial will help you learn to scan using the Trainer
supplied in the package.
1. Slide the Trainer onto the tip of the Pen (instead of the
cap) and press into place.
2. Press the red Power key to turn the Pen on. Select the
ReadingPen icon from the Pen Main Menu by tapping
on it with the stylus or by using the direction keys. If you
are using the Pen for the first time you will be asked to
select a dictionary. Select the dictionary appropriate for
your needs.
3. Position the Trainer at the end of the practice sentence
with the Pen facing the text.
4. Position the Pen so that the text is centered between the
feet of the Trainer.
5. Glide the Pen from right to left in a straight line over the
text. Start scanning 1cm from the end of the sentence
and finish 1cm after.
Use the following practice sentence:
This sentence will help me practice scanning.
Note: The Pen default is set to right-handed scanning. To
change the Pen display to left-handed scanning, use the
Set Right-/Left- Handed option from Preferences in the
Pen Main Menu.
Positioning of Text for Scanning with Trainer
Tutorials
13