Setting Up Your Pen; Basic Pen Commands - WizCom Technologies Quicktionary 2 Premium Professional Manual

Setting Up Your Pen

To get started:
1. Remove your Pen from its protective case.
2. Remove the battery compartment cover from the back
of the Pen.
3. Insert 2 AAA batteries into the Pen with the positive and
negative terminals corresponding to the markings on
the sides of the battery compartment.
4. Close the battery compartment.
5. Remove the protective cover from the Pen tip.
6. Press
7. The Pen is ready to scan!
Note: If you are left-handed, see Right-Left-Handed on
page 54 to change your Pen to left-handed scanning.

Basic Pen Commands

The Pen Keys and their Functions
The keypad contains seven keys for operating your Pen.
Use the keys as follows:
Power key
ENT key
selection or perform an operation.
ESC key
cancel an operation.
Direction keys
screens.
Navigating Menus and Lists
To select an item from a menu or a list:
1. Scroll through the menu, using
you want is highlighted.
2. Press ENT.
To select a command key on the display:
1. Use the direction keys to highlight the command key.
2. Press ENT.
To return to a previous menu level from a sub-menu, option
or list, press ESC.
to turn the Pen on.
: Turn the Pen on and off.
: Access submenus or screens, confirm a
: Navigate backwards, close a screen, or
: Scroll through menus and
or
Getting Started
until the item
5