WizCom Technologies Quicktionary 2 Premium Professional Manual page 73

Problem: I receive an "Out of memory" message on my
Pen. What should I do?
Solution:
If you receive this message, it most likely means that the
extension card at the back of your Pen is loose, not that you
have no memory left in your Pen.
All you have to do to fix this is open the back of the Pen
(where you inserted the batteries) with your fingernail and
press down firmly on the extension card with your finger.
If this does not fix the problem, open the battery
compartment. Remove the extension card from its slot above
the batteries and blow on it and into the extension card
compartment to remove any dust particles that may have
accumulated. Replace the extension card firmly into the slot.
This should solve the problem.
Problem: I've changed my Pen user interface to another
language and now I don't know how to change it back to
English!
Solution:
Do the following:
1. From the Pen Main Menu scroll down until you see
and press ENT.
2. Scroll down until you see
3. Scroll up or down using
English on the screen and press ENT.
This should return the Pen to the English interface.
Problem: My Pen will not turn on. What should I do?
Solution:
If your pen does not seem to turn on when you press the
power key, or if it seems to show a blank gray screen, make
sure the Pen is off and do the following:
Open the battery compartment and insert new AAA
batteries.
and press ENT.
or until you see the word
Troubleshooting
73