Table of Contents
Advertisement
①Insert your USB stick with target .g or .gx file to your
Guider IIS
.
②Turn on the Guider IIS. Make sure the build plate has been leveled and the
filament is loaded.
③Tap [Print] and then tap the USB Stick icon in the middle. The file(s) will be
displayed on the screen. Select the file you want to print and tap [Print]. The
file will be transferred to the printer.
⑥And the printer will heat up the nozzle automatically and start to print after
the nozzle reaches the aimed temperature.,
Abort ： To stop heating and printing. Once you tap [Abort], the
process is
irreversible.
Pause ：To suspend the print job, you can tap it again to resume it. You can
use this function when you want to change the filament halfway.
7.2.4 Print from Computer (Ethernet Cable connection)
①Connect your Guider IIS series with your PC via an Ethernet cable.(Please
refer to 6.2.13 )
Enter the IP Address shown on your Guider IIS series interface and then click
[Connect].
Guider IIS series User Guide | www.flashforge.com
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Guider IIS Series and is the answer not in the manual?
Questions and answers
What is the default IP address
The default IP address for the FLASHFORGE Guider IIS Series 3D printer is not provided in the given context.
This answer is automatically generated