Slice And Export The 3D Model; Build The 3D Model; Basic 3D Printing Process - FLASHFORGE 3D PRINTER Guider IIS Series User Manual

turn a mobile device into a 3D scanner.
· From the Cloud The most popular way of obtaining a 3D model is to
download it from websites that allow users to upload 3D models that they
designed.E.g. : www. thingiverse.com

1.1.2 Slice and Export the 3D Model:

Slice software is the software that prepares 3D models for printing and turns
them into instructions for the 3D printers. FlashPrint is the slicing software
used for the FlashForge Guider IIS series.
Using FlashPrint, you can turn .stl files into .g or .gx files for printing. Then the
files can be transferred to your Guider IIS series printers via USB cable, USB
stick ,Wi-Fi or Ethernet cable.
GuiderIIS series device support Simplify3D software, software not developed
by FlashForge may need register or charge extra fee, please choose to use(or
not) according to your needs.

1.1.3 Build the 3D Model:

Once the output file has been transferred to your Guider IIS, it will start to turn
the 3D model into a physical object by laying down layers of filament.
1.1.4 Basic 3D Printing Process：
Install printer
First
Print
Install software
Print model
Daily
Print
After print
Processing
Guider IIS series User Guide | www.flashforge.com
Printer Unboxing
Accessories check
Install software
Load in
Acquire
model
model
Take down Remove
model supports
Filament Loading
Start software
Adjust
Set printing
model
parameters
Distribute
print jobs