EdilKamin FLEXA Installation, Use And Maintenance Manual page 30

ADVICE FOR POTENTIAL PROBLEMS
A09 safety thermal
(occurs when the safety thermostat, located against with the hopper, is tripped by overheating of the pellet hopper; to reset press
the red button on the right side of the stove after removing the protective black cap).
• Excessive pellet load in combustion chamber
• Stove/chimney fl ue dirty
A11 triac error
(occurs in the event of a board malfunction)
• Failure check carried out by technician
• replace the circuit board
A12 smoke extractor malfunction
(occurs when the circuit board does not read the smoke extractor revs; call CAT)
• Smoke extractor blocked
• Speed sensor not working
• Smoke extractor not working
• Smoke motor thermostat intervention
• No earth connection
• faulty circuit board
- 30
-