Safety Information - EdilKamin FLEXA Installation, Use And Maintenance Manual

SAFETY INFORMATION

FLEXA is designed to heat the room where they are placed,
by means of radiation and air movement that is let out from
the front grilles, through automatic pellet combustion in the
hearth, and adjoining rooms through air movement analysed
by the pipes on the back.
• The only risks that may derive from using the stove pertain
to non-compliance with installation instructions, direct contact
with live electrical parts (internal), contact with the fi re or hot
parts (glass, pipes, hot air output), or foreign substances being
put in the stove.
• Only use wood pellets as fuel.
• Should components fail, the stoves are equipped with safety
devices that guarantee automatic shutdown. These are activated
without any intervention required.
• In order to function correctly, the stove must be installed in
accordance with the instructions given herein and the door
must not be opened during operation: combustion is fully
automatic and requires no intervention.
• Under no circumstances should any foreign substances be
entered into the hearth or hopper.
• Do not use fl ammable products to clean the smoke channel
(the fl ue section connecting the stove smoke outlet to the
chimney fl ue).
• Hearth and hopper components must only be cleaned with a
vacuum cleaner.
• The glass can be cleaned when COLD with a suitable product
(e.g. GlassKamin Edilkamin) and a cloth.
• Do not clean when hot.
The undersigned EDILKAMIN S.p.a. with head offi ce headquar-
ters at Via Vincenzo Monti 47 - 20123 Milan - Italy - VAT
IT00192220192
Declares under its own responsability as follows:
The pellet stove illustrated below conforms to Regulation EU
305/2011 (CPR) and to the harmonised European Standard
EN 14785:2006
WOOD PELLET STOVES, trademark EDILKAMIN, called
FLEXA
Year of manufacture: Ref. Data nameplate
Declaration of performance (DoP - EK 057): Ref. data tag plate
In addition, it is hereby declared that:
the wood pellet stove FLEXA is in compliance with the require-
ments of the European directives:
2006/95/EC - Low voltage directive
2004/108/EC - Electromagnetic compatibility directive
EDILKAMIN S.p.a. will decline all responsability of malfunctio-
ning or damage to the equipment in case of unauthorized
substitution, assembly or modifi cations of any sort on the said
equipment on the part of non-EDILKAMIN personnel.
• Ensure that the stoves are installed and ignited by a qualifi ed
Edilkamin DEALER, in accordance with the instructions
given herein.
• When the stove is in operation, the exhaust pipes and door
become very hot (do not touch without wearing the thermal
glove).
• Do not place anything, which is not heat resistant near the
stove.
• NEVER use liquid fuel to ignite the stove or rekindle the
embers.
• Do not obstruct the ventilation apertures in the room where
the stove is installed, nor the air inlets of the stove itself.
• Do not wet the stove and do not go near electrical parts
with wet hands.
• Do not use reducers on the smoke exhaust pipes.
• The stove must be installed in a room that is suitable for
fi re prevention and equipped with all that is required (power
and air supply and outlets) for the stove to function correctly
and safely.
ATTENTION:
• SHOULD IGNITION FAIL, DO NOT RE-IGNITE
UNTIL YOU HAVE EMPTIED THE COMBUSTION
CHAMBER.
• THE PELLET EMPTIED FROM THE COMBUSTION
CHAMBER MUST NOT BE
DEPOSITED INSIDE THE HOPPER.
- 18
-