EdilKamin FLEXA Installation, Use And Maintenance Manual page 26

Available languages

REMOTE CONTROL code 658830 - optional

SYMBOLS KEY

Note: depending on the production lots, two different symbols for the power button may be used ( (X - see ﬁ g. 1-2)

: ignition / shutdown button

: button to increase the power/operating temperature

: "AMBIENT" button; changes the desired ambient temperature (SET AMBIENT TEMP. )

P (ﬁ g. 1) M (ﬁ g. 2)

: "POWER" button; modiﬁ es the power (from P1 to P5)

- the remote control transmits by means of an infrared signal within a range of 4-5 metres.

The LED transmission signal must be in line with the receiving LED of the stove for the signal to be transmitted correctly. This

must also be in a free-ﬁ eld environment, therefore, free of obstacles.

- The remote control works with 3V battery. Battery duration depends upon usage, however, the average duration is that of an

entire season.

To replace the battery, remove the door, Y, where the battery is housed.

The discharged battery should be properly disposed of in accordance with current regulations in force.

- the remote control must be cleaned with a damp cloth and no detergents or liquids must be sprayed onto it. In any case, use

neutral detergents which are free from aggressive substances.

- handle the remote control with care. It could easily break if dropped, due to its size.

NOTES:

- Operating temperature:

- Storage temperature:

- Operating humidity is:

- Degree of protection is:

- Weight with battery inserted:

ELECTRONIC EQUIPMENT

(X)

ﬁ g. 1

0-40 °C

-10/+50°C

20-90% R.H with no condensation

IP 40

15 gr

(X)

ﬁ g. 2

- 26