EdilKamin FLEXA Installation, Use And Maintenance Manual page 20

FEATURES
PRINCIPLE OF OPERATION
The fuel (pellets) is transferred from the storage hopper (A)
to the combustion chamber (D) by means of a feed screw (B),
which is driven by a gear motor (C). The pellets are ignited by
L
the air that is heated by an electrical resistance (E) and drawn
into the combustion chamber by a centrifugal fan (M). The
fumes produced during the combustion process are extracted I
from the hearth by the same centrifugal fan (M) and expelled
A
through the outlet (F) located on the lower part at the back of
the stove.
Air is blown into the hollow space at the back of the fi rebox by
a fan (G), where it is heated before coming out into the room
from the front grille (I).
B
The hearth is made with an internal cast iron structure, and is
closed in the front by two overlapping doors.
- external glass ceramic door
- an inner door made from ceramic glass which is in direct
C
E
contact with the fi re. D
The pellet hopper is at the top of the stove.The hopper is fi lled
through a lid found at the back of the top
Fuel quantity, smoke extraction and combustion air supply
F
are all controlled by an electronic control board, which is
M
*
equipped with Galileo software to achieve high combustion
effi ciency and low emissions.
N
The synoptic panel (L) is installed on the top, through which
all phases of operation can be displayed and controlled.
G
The main phases can be managed via the optionally supplied
remote control.
The external covering is available in the following colours and
materials:
- ceramic: opaque white, red
- plating: grey steel sides, grey ceramic top
- ollare stone
*
GALILEO is a combustion safety and control system which al-
lows optimal performance in all
conditions.
GALILEO guarantees optimal functions thanks to a sensor that
measures the air fl ow contributing to combustion.
The surveying and consequent optimisation of the combustion
parameters takes place in a continuous way, so as to correct any
possible functioning anomalies in real time
The GALILEO system offers constant combustion, automatical-
ly regulating the draft based on the characteristics
of the chimney fl ue (bends, length, shape, diameter, etc..) and
environmental conditions (wind, humidity, atmospheric
pressure, installations at high altitude, etc.). The standards for
installation must be respected.
- 20
-