Advanced Bionics NEPTUNE AquaMic Instructions For Use Manual page 6

Note: If AquaMic is worn following submersion in water, sound qual-
ity may be affected. It may take up to 30 minutes for the AquaMic to
dry and for typical system sound quality to be restored.
Following submersion:
• Rinse with clean water
• Remove AquaMic from cable
• Remove the Color Cap
• Gently shake any excess water from the AquaMic
• Wipe or blot the AquaMic upper surface with a soft cloth
• Place in Zephyr by Dry & Store® or similar desiccant device to
dry completely
• Unaided listeners may periodically assess AquaMic sound qual-
ity using the built-in Neptune Connect microphone listening
mode. For instructions, consult your Neptune User Guide.
Cable*
To avoid damage to the cable when removing from the AquaMic,
grasp only by the connector.
*packaged separately
Dry & Store® is a registered trademark of Ear Technology Corporation
5