Advanced Bionics NEPTUNE AquaMic Instructions For Use Manual page 4

Adding Magnets
If needed, additional UHP
within the AquaMic (Figure 1). If AquaMic retention is inadequate
with four internal magnets, the Bottom Cover
removed, and one thin
may be added to the external well (Figure 2).
Increasing Magnet Strength
Internal Well
*
**
External Well
• Do not use a UHP magnet in the external well.
• Before placing a magnet in the external well, be
sure to remove additional internal magnets to avoid
potential skin irritation, pressure, or redness.
• Do not use broken, cracked, or chipped magnets. If necessary,
contact your cochlear implant center or Advanced Bionics for
a replacement.
magnets* may be added one at a time
magnet*** (CI-7518, packaged separately)
Figure 1
Patch** may be
Figure 2
***
3