Figure 6.2
Desktop microphone to radio interface
6.5
Circuit Description
TM8000 Mobile Radio Accessories Manual
March 2004 © Tait Electronics Limited
.
The desktop microphone uses a dynamic microphone capsule and contains
a pre-amplifier (Q1) to boost the microphone level to that required by the
radio. Power for the pre-amplifier is provided by the electret microphone
bias circuit within the radio. R5 is used to adjust the gain.
PTT and hookswitch signals are combined onto one line and fed to the
control head PTT input of the radio.
TMAA10-01 Desktop Microphone
61