Installing An Internal Rdx Docking Station - IBM Power Systems RDX Manual

Figure 6. Removing the service access cover
Installing an internal RDX docking station in the 9009-41A, 9009-42A, or 9223-42H
To install an internal RDX docking station, complete the steps in this procedure.
Procedure
1. Ensure that you have the electrostatic discharge (ESD) wrist strap on and that the ESD clip is plugged
into a ground jack or connected to an unpainted metal surface. If not, do so now.
2. For a stand-alone system, open the front door by inserting the front door key into the lock as shown
below. Twist the key to the left (counterclockwise) to unlock the door.Horizontal is locked; vertical is
unlocked..
10 Power Systems: RDX docking stations, power cable, and removable disk drives for the 9009-41A, 9009-42A,
or 9223-42H