Table of Contents
Advertisement
Figure 55. Connecting the internal RDX power cable
3. For a rack-mounted system, replace the air baffle (A) straight down into the chassis as shown in Figure
56 on page 66.
For a stand-alone system, replace the air baffle (A) straight into the side of the chassis as shown in
Figure 57 on page 67.
Ensure that the front flap tucks under the front chassis.
RDX docking stations, removable disk drives, and power cable, for the 9009-41A, 9009-42A, or 9223-42H 65
Advertisement
Table of Contents
